To connect your speaker, start by pressing and holding the power button for approximately 5-8 seconds when powering on. Once your speaker is powered on you will see a flashing blue and red LED light which indicates that your speaker is in pairing mode. Select “Mini H20 3” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
Press and hold the power button for approximately 8-10 seconds. Make sure to keep holding the power button down even after your speaker turns on, letting go once you see your speaker is listed in your phone’s Bluetooth settings menu as a device available for pairing. Then connect to the listed device.
First, start by powering on both speakers. On your first speaker, press and hold the power and the minus button at the same time for 3 seconds. (This speaker will act as the parent speaker) On the second speaker, press and hold the power button and the plus button at the same time for 3 seconds (this speaker will act as the child speaker) Allow for a few seconds for speakers to find each other. Once both speakers are paired together you will be able to listen to music at the same time through both speaker.
You can pair with the following speakers: IMW258 IMW269 IMW449
Your speaker comes included with a Micro USB Charging Cable to charge your speaker. Plug your Micro USB Cable into a power source and connect to the speaker. Once the speaker is charging, you will see a red LED light illuminated on the speaker.
It takes approximately 2-3 hours to receive a full charge.
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
Your speaker uses a Micro USB Cable.
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
Yes, our speakers float to the top of the water to prevent loss of your speaker!
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
The Voice Assistant Feature allows you to access Siri on iPhone and Google Assistant on Android Phones through your speaker. This can be activated in two different ways. The first way is by tapping the power button twice. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
Yes, your speaker can be used to make phone calls. This can be activated by: Pressing the power button once to answer or end a call To reject a call, press and hold the power button for 2 seconds.
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
To connect your speaker, start by pressing and holding the power button for approximately 5-8 seconds when powering on. Once your speaker is powered on you will see a flashing blue and red LED light which indicates that your speaker is in pairing mode. Select “Baby Boom” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
Press and hold the power button for approximately 8-10 seconds. Make sure to keep holding the power button down even after your speaker turns on, letting go once you see your speaker is listed in your phone’s Bluetooth settings menu as a device available for pairing. Then connect to the listed device.
First, start by powering on both speakers. On your first speaker, press and hold the power and the minus button at the same time for 3 seconds. (This speaker will act as the parent speaker) On the second speaker, press and hold the power button and the plus button at the same time for 3 seconds (this speaker will act as the child speaker) Allow for a few seconds for speakers to find each other. Once both speakers are paired together you will be able to listen to music at the same time through both speaker.
You can pair with the following speakers: IMW269 IMW258 IMW449
Your speaker comes included with a Micro USB Charging Cable to charge your speaker. Plug your Micro USB Cable into a power source and connect to the speaker. Once the speaker is charging, you will see a red LED light illuminated on the speaker
It takes approximately 2-3 hours to receive a full charge.
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
Your speaker uses a Micro USB Cable.
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
Yes, our speakers float to the top of the water to prevent loss of your speaker!
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
The Voice Assistant Feature allows you to access Siri on iPhone and Google Assistant on Android Phones through your speaker. This can be activated in two different ways. The first way is by tapping the power button twice. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
Yes, your speaker can be used to make phone calls. This can be activated by: Pressing the power button once to answer or end a call To reject a call, press and hold the power button for 2 seconds.
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
To connect your speaker, start by pressing and holding the power button for approximately 5-8 seconds when powering on. Once your speaker is powered on you will see a flashing blue and red LED light which indicates that your speaker is in pairing mode. Select “Baby Boom XL” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
Press and hold the power button for approximately 8-10 seconds. Make sure to keep holding the power button down even after your speaker turns on, letting go once you see your speaker is listed in your phone’s Bluetooth settings menu as a device available for pairing. Then connect to the listed device.
First, start by powering on both speakers. On your first speaker, press and hold the power and the minus button at the same time for 3 seconds. (This speaker will act as the parent speaker) On the second speaker, press and hold the power button and the plus button at the same time for 3 seconds (this speaker will act as the child speaker) Allow for a few seconds for speakers to find each other. Once both speakers are paired together you will be able to listen to music at the same time through both speaker.
You can pair with the following speakers: IMW269 IMW270 IMW258 IMW449
Your speaker comes included with a Micro USB Charging Cable to charge your speaker. Plug your Micro USB Cable into a power source and connect to the speaker. Once the speaker is charging, you will see a red LED light illuminated on the speaker
It takes approximately 2-3 hours to receive a full charge.
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
Your speaker uses a Micro USB Cable.
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
Yes, our speakers float to the top of the water to prevent loss of your speaker!
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
The Voice Assistant Feature allows you to access Siri on iPhone and Google Assistant on Android Phones through your speaker. This can be activated in two different ways. The first way is by tapping the power button twice. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
Yes, your speaker can be used to make phone calls. This can be activated by: Pressing the power button once to answer or end a call To reject a call, press and hold the power button for 2 seconds.
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
To connect your speaker, start by pressing and holding the power button for approximately 5-8 seconds when powering on. Once your speaker is powered on you will see a flashing blue and red LED light which indicates that your speaker is in pairing mode. Select “Jacket H20 4” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
Press and hold the power button for approximately 8-10 seconds. Make sure to keep holding the power button down even after your speaker turns on, letting go once you see your speaker is listed in your phone’s Bluetooth settings menu as a device available for pairing. Then connect to the listed device.
First, start by powering on both speakers. On your first speaker, press and hold the power and the minus button at the same time for 3 seconds. (This speaker will act as the parent speaker) On the second speaker, press and hold the power button and the plus button at the same time for 3 seconds (this speaker will act as the child speaker) Allow for a few seconds for speakers to find each other. Once both speakers are paired together you will be able to listen to music at the same time through both speaker.
You can pair with the following speakers: IMW258 IMW269 IMW449
Your speaker comes included with a Micro USB Charging Cable to charge your speaker. Plug your Micro USB Cable into a power source and connect to the speaker. Once the speaker is charging, you will see a red LED light illuminated on the speaker
It takes approximately 2-3 hours to receive a full charge.
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
Your speaker uses a Micro USB Cable.
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
Yes, our speakers float to the top of the water to prevent loss of your speaker!
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
The Voice Assistant Feature allows you to access Siri on iPhone and Google Assistant on Android Phones through your speaker. This can be activated in two different ways. The first way is by tapping the power button twice. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
Yes, your speaker can be used to make phone calls. This can be activated by: Pressing the power button once to answer or end a call To reject a call, press and hold the power button for 2 seconds.
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
To pair your speaker, press and hold the power button for approximately 3-4 seconds. Your speaker will begin flashing blue and white LED lights – this will indicate that your speaker is in pairing mode. Select “Mini LifeJacket Jolt” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
After connecting your speaker via Bluetooth, press and hold the link button for approximately 2-3 seconds – your link button will illuminate green. This will indicate the your speaker has gone into house party pairing mode and will act as the parent speaker. On any additional speakers, tap the link button once – the link button will illuminate green and will begin searching for the first speaker. Allow for a few seconds for speakers to connect.
You can pair with the following speakers: IMT810 IMW999 IMW991 IMW899 IMW901 IMW899L IMW790L IMW581L IMW580L IMW480 IMW479L
The Voice Assistant feature allows you to access Siri on iPhone and Google Assist on Android Phones through your Mini LifeJacket Jolt. This can be activated in two different ways. The first way is by tapping the microphone button. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
To change the lighting on your speaker, press the star button.
Your speaker comes included with a Micro USB Charging Cable to charge your speaker. Plug your Micro USB Cable into a power source and connect to the speaker. Once the speaker is charging, you will see a red LED light illuminated on the speaker
It takes approximately 4-5 hours to receive a full charge.
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
Yes, there is a USB Port located on the side of the speaker that can be used to charge devices!
Your speaker uses a Micro USB Cable.
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
Yes, our speakers float to the top of the water to prevent loss of your speaker!
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
To pair your speaker, press and hold the power button for approximately 3-4 seconds. Your speaker will begin flashing blue and white LED lights – this will indicate that your speaker is in pairing mode. Select “Mini LifeJacket Jolt” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
After connecting your speaker via Bluetooth, press and hold the link button for approximately 2-3 seconds – your link button will illuminate green. This will indicate the your speaker has gone into house party pairing mode and will act as the parent speaker. On any additional speakers, tap the link button once – the link button will illuminate green and will begin searching for the first speaker. Allow for a few seconds for speakers to connect.
You can pair with the following speakers: IMT810 IMW999 IMW991 IMW899 IMW901 IMW899L IMW790L IMW581L IMW580L IMW480 IMW479L
The Voice Assistant feature allows you to access Siri on iPhone and Google Assist on Android Phones through your Mini LifeJacket Jolt. This can be activated in two different ways. The first way is by tapping the microphone button. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
Your speaker comes included with a Micro USB Charging Cable to charge your speaker. Plug your Micro USB Cable into a power source and connect to the speaker. Once the speaker is charging, you will see a red LED light illuminated on the speaker
Yes, there is a USB Port located on the side of the speaker that can be used to charge devices!
It takes approximately 4-5 hours to receive a full charge.
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
Your speaker uses a Micro USB Cable.
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
Yes, our speakers float to the top of the water to prevent loss of your speaker!
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
To pair your speaker, press and hold the power button for approximately 3-4 seconds. Your speaker will begin flashing blue and white LED lights – this will indicate that your speaker is in pairing mode. Select “LifeJacket Jolt” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
After connecting your speaker via Bluetooth, press and hold the link button for approximately 2-3 seconds – your link button will illuminate green. This will indicate the your speaker has gone into house party pairing mode and will act as the parent speaker. On any additional speakers, tap the link button once – the link button will illuminate green and will begin searching for the first speaker. Allow for a few seconds for speakers to connect.
You can pair with the following speakers: IMT810 IMW999 IMW991 IMW899 IMW901 IMW899L IMW790L IMW581L IMW580L IMW480 IMW479L
The Voice Assistant feature allows you to access Siri on iPhone and Google Assist on Android Phones through your Mini LifeJacket Jolt. This can be activated in two different ways. The first way is by tapping the microphone button. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
To change the lighting on your speaker, press the star button.
There are 5 different light modes: Beat to the music, Pulse light, Color Changing, Constant solid, Off
Your speaker comes included with a Micro USB Charging Cable to charge your speaker. Plug your Micro USB Cable into a power source and connect to the speaker. Once the speaker is charging, you will see a red LED light illuminated on the speaker
Yes, there is a USB Port located on the side of the speaker that can be used to charge devices!
It takes approximately 4-5 hours to receive a full charge.
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
Your speaker uses a Micro USB Cable.
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
Yes, our speakers float to the top of the water to prevent loss of your speaker!
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
To pair your speaker, press and hold the power button for approximately 3-4 seconds. Your speaker will begin flashing blue and white LED lights – this will indicate that your speaker is in pairing mode. Select “BoomJacket Jolt” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
After connecting your speaker via Bluetooth, press and hold the link button for approximately 2-3 seconds – your link button will illuminate green. This will indicate the your speaker has gone into house party pairing mode and will act as the parent speaker. On any additional speakers, tap the link button once – the link button will illuminate green and will begin searching for the first speaker. Allow for a few seconds for speakers to connect.
You can pair with the following speakers: IMT810 IMW999 IMW991 IMW899 IMW901 IMW899L IMW790L IMW581L IMW580L IMW480 IMW479L
The Voice Assistant feature allows you to access Siri on iPhone and Google Assist on Android Phones through your Mini LifeJacket Jolt. This can be activated in two different ways. The first way is by tapping the microphone button. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
To change the lighting on your speaker, press the star button.
Your speaker comes included with a Micro USB Charging Cable to charge your speaker. Plug your Micro USB Cable into a power source and connect to the speaker. Once the speaker is charging, you will see a red LED light illuminated on the speaker
It takes approximately 4-5 hours to receive a full charge.
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
Yes, there is a USB Port located on the side of the speaker that can be used to charge devices!
Your speaker uses a Micro USB Cable.
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
Yes, our speakers float to the top of the water to prevent loss of your speaker!
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
To pair your speaker, press and hold the power button for approximately 3-4 seconds. Your speaker will begin flashing blue and white LED lights – this will indicate that your speaker is in pairing mode. Select “LifeJacket XL Jolt” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
After connecting your speaker via Bluetooth, press and hold the link button for approximately 2-3 seconds – your link button will illuminate green. This will indicate the your speaker has gone into house party pairing mode and will act as the parent speaker. On any additional speakers, tap the link button once – the link button will illuminate green and will begin searching for the first speaker. Allow for a few seconds for speakers to connect.
You can pair with the following speakers: IMT810 IMW999 IMW991 IMW899 IMW901 IMW899L IMW790L IMW581L IMW580L IMW480 IMW479L
The Voice Assistant feature allows you to access Siri on iPhone and Google Assist on Android Phones through your Mini LifeJacket Jolt. This can be activated in two different ways. The first way is by tapping the microphone button. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
Your speaker comes included with a Micro USB Charging Cable to charge your speaker. Plug your Micro USB Cable into a power source and connect to the speaker. Once the speaker is charging, you will see a red LED light illuminated on the speaker
It takes approximately 4-5 hours to receive a full charge.
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
Yes, there is a USB Port located on the side of the speaker that can be used to charge devices!
Your speaker uses a Micro USB Cable.
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
Yes, our speakers float to the top of the water to prevent loss of your speaker!
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
To pair your speaker, press and hold the power button for approximately 3-4 seconds. Your speaker will begin flashing blue and white LED lights – this will indicate that your speaker is in pairing mode. Select “Super Lifejacket Jolt” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
After connecting your speaker via Bluetooth, press and hold the link button for approximately 2-3 seconds – your link button will illuminate green. This will indicate the your speaker has gone into house party pairing mode and will act as the parent speaker. On any additional speakers, tap the link button once – the link button will illuminate green and will begin searching for the first speaker. Allow for a few seconds for speakers to connect.
You can pair with the following speakers: IMT810 IMW999 IMW991 IMW899 IMW901 IMW899L IMW790L IMW581L IMW580L IMW480 IMW479L
The Voice Assistant feature allows you to access Siri on iPhone and Google Assist on Android Phones through your Mini LifeJacket Jolt. This can be activated in two different ways. The first way is by tapping the microphone button. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
To change the lighting on your speaker, press the star button.
Your speaker comes included with a Micro USB Charging Cable to charge your speaker. Plug your Micro USB Cable into a power source and connect to the speaker. Once the speaker is charging, you will see a red LED light illuminated on the speaker
It takes approximately 4-5 hours to receive a full charge.
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
Yes, there is a USB Port located on the side of the speaker that can be used to charge devices!
Your speaker uses a Micro USB Cable.
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
Yes, our speakers float to the top of the water to prevent loss of your speaker!
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
To charge your speaker, plug the included AC adapter into a power and plug into your speaker. Once speaker is charging, you will see an orange LED light illuminated. When the speaker is finished charging the LED light will turn off.
It takes approximately 4-5 hours to receive a full charge.
To use NFC pairing with a compatible device – simple tap your NFC enabled phone against the Altec Logo located on the front of your speaker. You phone will automatically pair! *NFC Pairing has to be turned on in your smartphone
After connecting your speaker via Bluetooth, press and hold the link button for approximately 2-3 seconds – your link button will illuminate green. This will indicate the your speaker has gone into house party pairing mode and will act as the parent speaker. On any additional speakers, tap the link button once – the link button will illuminate green and will begin searching for the first speaker. Allow for a few seconds for speakers to connect.
Yes, there is a USB Port located on the side of the speaker that can be used to charge devices!
To pair your speaker, press and hold the power button for approximately 3-4 seconds. Your speaker will begin flashing blue and white LED lights – this will indicate that your speaker is in pairing mode. Select “Soundbucket XL” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
The Voice Assistant feature allows you to access Siri on iPhone and Google Assist on Android Phones through your Mini LifeJacket Jolt. This can be activated in two different ways. The first way is by tapping the microphone button. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
You can pair with the following speakers: IMT810 IMW999 IMW991 IMW899 IMW901 IMW899L IMW790L IMW581L IMW580L IMW480 IMW479L
To change the lighting on your speaker, press the star button.
The speaker comes included with convenient control located on the top of your speaker: Press the play button to play or pause a song Press the Volume up button to turn up to sound on your speaker or switch to the next song Press the Volume down button to turn down the volume or to go back to the previous song.
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
To charge your speaker, plug the included AC adapter into a power and plug into your speaker. Once speaker is charging, you will see an orange LED light illuminated. When the speaker is finished charging the LED light will turn off.
It takes approximately 4-5 hours to receive a full charge.
To use NFC pairing with a compatible device – simple tap your NFC enabled phone against the Altec Logo located on the front of your speaker. You phone will automatically pair! *NFC Pairing has to be turned on in your smartphone
After connecting your speaker via Bluetooth, press and hold the link button for approximately 2-3 seconds – your link button will illuminate green. This will indicate the your speaker has gone into house party pairing mode and will act as the parent speaker. On any additional speakers, tap the link button once – the link button will illuminate green and will begin searching for the first speaker. Allow for a few seconds for speakers to connect.
Yes, there is a USB Port located on the side of the speaker that can be used to charge devices!
To pair your speaker, press and hold the power button for approximately 3-4 seconds. Your speaker will begin flashing blue and white LED lights – this will indicate that your speaker is in pairing mode. Select “Soundbucket” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
The Voice Assistant feature allows you to access Siri on iPhone and Google Assist on Android Phones through your Mini LifeJacket Jolt. This can be activated in two different ways. The first way is by tapping the microphone button. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
You can pair with the following speakers: IMT810 IMW999 IMW991 IMW899 IMW901 IMW899L IMW790L IMW581L IMW580L IMW480 IMW479L
To change the lighting on your speaker, press the star button.
The speaker comes included with convenient control located on the top of your speaker: Press the play button to play or pause a song Press the Volume up button to turn up to sound on your speaker or switch to the next song Press the Volume down button to turn down the volume or to go back to the previous song.
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
To pair your speaker, press and hold the power button for approximately 3-4 seconds. Your speaker will begin flashing blue and white LED lights – this will indicate that your speaker is in pairing mode. Select “RockBox” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
After connecting your speaker via Bluetooth, press and hold the link button for approximately 2-3 seconds – your link button will illuminate green. This will indicate the your speaker has gone into house party pairing mode and will act as the parent speaker. On any additional speakers, tap the link button once – the link button will illuminate green and will begin searching for the first speaker. Allow for a few seconds for speakers to connect.
You can pair with the following speakers: IMT810 IMW999 IMW991 IMW899 IMW901 IMW899L IMW790L IMW581L IMW580L IMW480 IMW479L
The Voice Assistant feature allows you to access Siri on iPhone and Google Assist on Android Phones through your Mini LifeJacket Jolt. This can be activated in two different ways. The first way is by tapping the microphone button. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
To change the lighting on your speaker, press the star button.
Your speaker comes included with a Micro USB Charging Cable to charge your speaker. Plug your Micro USB Cable into a power source and connect to the speaker. Once the speaker is charging, you will see a red LED light illuminated on the speaker
It takes approximately 4-5 hours to receive a full charge.
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
Your speaker uses a Micro USB Cable.
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
Yes, our speakers float to the top of the water to prevent loss of your speaker!
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
To pair your speaker, press and hold the power button for approximately 3-4 seconds. Your speaker will begin flashing blue and white LED lights – this will indicate that your speaker is in pairing mode. Select “RockBox XL” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.
After connecting your speaker via Bluetooth, press and hold the link button for approximately 2-3 seconds – your link button will illuminate green. This will indicate the your speaker has gone into house party pairing mode and will act as the parent speaker. On any additional speakers, tap the link button once – the link button will illuminate green and will begin searching for the first speaker. Allow for a few seconds for speakers to connect.
You can pair with the following speakers: IMT810 IMW999 IMW991 IMW899 IMW901 IMW899L IMW790L IMW581L IMW580L IMW480 IMW479L
The Voice Assistant feature allows you to access Siri on iPhone and Google Assist on Android Phones through your Mini LifeJacket Jolt. This can be activated in two different ways. The first way is by tapping the microphone button. The second way is by using voice control – make sure that your voice assistant on your smartphone is on and always listening for “Hey Siri” or “Hey Google”. Once this is enabled you will be able to simply say a command a question and receive a reply instantly!
To change the lighting on your speaker, press the star button.
Your speaker comes included with a Micro USB Charging Cable to charge your speaker. Plug your Micro USB Cable into a power source and connect to the speaker. Once the speaker is charging, you will see a red LED light illuminated on the speaker
It takes approximately 4-5 hours to receive a full charge.
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
Your speaker uses a Micro USB Cable.
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
Yes, our speakers float to the top of the water to prevent loss of your speaker!
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.
To pair your speaker, press and hold the power button for approximately 3-4 seconds. Your speaker will begin flashing blue and white LED lights – this will indicate that your speaker is in pairing mode. Select “Sonic Boom 2” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep
After connecting your speaker via Bluetooth, press and hold the link button for approximately 2-3 seconds – your link button will illuminate green. This will indicate the your speaker has gone into house party pairing mode and will act as the parent speaker. On any additional speakers, tap the link button once – the link button will illuminate green and will begin searching for the first speaker. Allow for a few seconds for speakers to connect.
You can pair with the following speakers: IMT810 IMW999 IMW991 IMW899 IMW901 IMW899L IMW790L IMW581L IMW580L IMW480 IMW479L
Your speaker comes included with an AC Adapter to charge your speaker. Plug your AC Adapter into a power source and connect to the speaker. Once the speaker is charging, you will see a red LED light illuminated on the speaker
It takes approximately 4-5 hours to receive a full charge.
To ensure you get the maximum battery life out of your Altec product, we recommend that you fully charge your speaker before using. Fully charge your speaker before removing from the charging cable. We also recommend that you use only the provided power supply unit that came with your product.
Your speaker uses an AC Adapter.
Yes, this speaker has an IP67 Waterproof Rating and can be fully submerged into water. * When submerging the speaker make sure that the USB cover is fully closed to prevent damage.
If using your speaker in a chlorine pool or in the salt water, make sure to rinse the speaker off with tap water and dry thoroughly to prevent rusting.
Your warranty covers products that fail to function properly under normal usage, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. To receive your replacement speaker, you must have your receipt of purchase within a year and your damaged speaker must be mailed back. Please note that we do not pay for shipping.